Voron Super Charger dual 5015 for Slice Mosquito LGX Extruder + Canbus

Voron toolhead for Mosquito Slice Magnum with dual 5015 blower fans. Designed around the LGX extruder + Mellow SHT42 canbus board. Add NeoPixels to the super charger front and run the wires up through the opening to the canbus board. Assembly is pretty self explanatory -- as I added the Complete model. I suggest printing the lower duct/hotend mount in PA-CF, that's where I've had most luck. If you want to use a different hotend, the stealth burner hotend mount parts should be compatible, but I didn't test, I have the mosquito slice magnum, so I made the air flow design to work with that hotend. Since the accelerometer is built into the canbus board, there is no need for mounting locations on the hotend fan holder. If you notice there are places to add zip ties on the hotend mount, so you can use those to run the heater cartridge and thermistor up to the canbus board and clear front idlers without issue. There is a front model with no lettering, and, there is a model with lettering inset, and letters separately that can be printed with IDEX or an AMS unit, I printed all my parts on the Bambu X1C with AMS.